Quick Answer: How To Clean Your Kanger Topbox Mini Vape Tank?

0 Comments

Can I clean my coils with vinegar?

If you don’t have access to ethanol to soak the coil, you can use other solvents like vinegar or a cheap vodka to soak the coil. While the soaking method requires a lot more time and patience, it is more effective and gets most of the gunk out in one cleaning.

How many puffs does a coil last?

2 ohms accordingly to the coil. Like I said, they don’t start to burn until about four to five thousand puffs, but the flavor drops off at the steep curve starting at two to three thousand.

How do you open the Kangertech Subox mini tank?

1) Simply remove the Tank from your device and then turn upside down. 2) The base piece can now be unscrewed from the top piece by turning in an anti-clockwise direction. 2) This reveals the filling area.

How do you clean a wick on a vape pen?

If your wick remains as dark and burned-out as before however, it’s probably time to call it quits. When cleaning your vape coils, you should hold them under a hot running tap for a few minutes to get rid of as much residue as possible before going in with vodka or rubbing alcohol.

Why is my Kangertech leaking?

If your Kanger Subtank is leaking, it is more than likely the issue is with the OCC coil. We’ve found that some Subtank OCC coils do not have enough cotton in them to prevent the liquid inside of the tank from slowly seeping out through the center tube and the airflow holes.

You might be interested:  Vape Critic How To Clean Crafty?

Why is my Kangertech blinking?

Possible something is either shorted in your cartridge or maybe in your device. If you have something else to try on (Another tank or RBA or RDA) I would see if those work. If not I would check the ohms to see if the cartridge is either shorted or not making great connection with the coils inside.

How do you turn down the ohms on a Kangertech?

You change the ohms with different coils/coil builds. Whenever you take the tank off, it will ask if it’s a new coil/tank or old. Just answer by hitting the up or down button (for yes or no) and the ohms will display on the screen.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post