How do I clean my e cig battery?
To clean the battery contacts, simply take a screwed up piece of dry tissue paper or a cotton wool bud and thoroughly wipe both inside and outside the screw part of the battery. Never use water to clean your e cigarette batteries.
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what’s called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won’ t do anything. Just check the battery isn’ t screwed on too tight.
Usually blinking 10 times means the battery is dead and it needs to be charged. If you have already tried charging it, maybe the charger is not working properly.
How do you fill an ego-t?
How to use the EGO – T Electronic Cigarette
- Unscrew the mouth piece on the tank and look down inside the tank.
- Unscrew the cap on your bottle of liquid.
- Fill the tank to the 1.6ml indicator on the side of the tank or until the wicks on each side are submerged into the liquid.
- Screw back on the mouth piece.
Why is my vape not working?
Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.
Why is my vape flashing?
Sometimes, the battery connection in your vape isn’t sufficient. If the battery is not screwed in properly, it won’t be able to fully charge and the indicator light will continue to blink. To fix this issue, unscrew the battery and re-screw it back in to make sure everything is firmly connected.
The battery of the eGo – T can be turned on and off by rapidly pressing its activation button 5 times. When the battery turns on or off, the blue activation light will blink.