Quick Answer: What To Do When You Cant Buy A New Atomizer For Vape?


How do I fix my vape atomizer?


  1. Clean all contacts on battery/mod, tank or pod.
  2. Remove and reinstall the coil (after cleaning)
  3. Try a new coil.
  4. Check the 510 pin and see if you can adjust it (mods/tanks)
  5. Try another tank on your mod.
  6. Try another mod with your tank.
  7. Adjust base of coil carefully if you can (mainly sub-Ohm coils)

Can I put any atomizer on my vape?

Short answer: yes, you can. The standard on the connector is called a 510, which is pretty much what is used on all ecigs. If you like the tank from one brand, and the mod from another brand, they should work together. There are a few rare instances where they don’t, but %99 of the time, it’s a yes.

Why is my new atomizer not working?

Most times when an atomizer doesn’t work with a device, it stems from the center pin being too low or an atomizers pin being too high. Manufacturers have began solving this issue recently, by making that center pin adjustable or spring-loaded to reduce this issue in the future.

You might be interested:  FAQ: How Long Does It Take For The Coil Vape Pen To Get Wet?

How do you know if your atomizer is bad?

Signs it’s time to change your vape coil

  1. A burning taste. Vaping a dead coil will eventually result in an acrid, burning taste.
  2. Gurgling sounds. Vapes shouldn’t gurgle.
  3. Weak or “off” e-Juice flavor. This often precedes a burnt taste.
  4. Low vapor production. The vapor produced by your coil will gradually lessen with time.

Why is my vape not working?

Inspect the battery contact; it may be clogged or coated. If this occurs, wipe the contact portion with a Q-tip soaked in rubbing alcohol, let the terminal dry, reconnect your cartridge to the battery and try it again. Do NOT overtighten your cartridge. Make sure your battery is turned on and fully charged.

How do I clean my atomizer?

Cleaning your coil is simple as the list suggests:

  1. 1 Remove the wicks from the coils.
  2. 2 Dry burn the coils as lightly as you can.
  3. 3 Remove atomizer from your mod.
  4. 4 Place the atomizer under running water while lightly brushing with a toothbrush.
  5. 5 Rinse one more time.
  6. 6 Dry burn the coil to remove droplets of water.

Is atomizer short dangerous?

Atomizer Short is a warning, that actually firing it would be very dangerous. 1: Let’s do the easy things first. Take that atomizer off, and clean out the 510 connection on the mod. 2: Give that atomizer a good clean under some hot water.

Can you put any atomizer on any mod?

As you know, most mods and tanks on the market share a 510-threaded connection. That being said, most sub-ohm tanks on the market are compatible with virtually any sub-ohm mod in the physical sense. As long as they both have that connection, they can physically fit together.

You might be interested:  FAQ: How To Tell If You Have A Bad New Vape Coil?

Does any tank fit any vape?

Tanks and mods are pretty interchangeable these days, as long as they have the 510 connection. The only problem you may run into (depending on tank /mod) is that some mods offer more wattage ranges, and you don’t want a tank that requires so much wattage your mod won’t support it well, causing poor battery life.

What does vape atomizer do?

An atomizer consists of a small heating element that vaporizes e-liquid and a wicking material that draws liquid onto the coil. Along with a battery and e-liquid the atomizer is the main component of every personal vaporizer. They also affect the vapor quantity or volume yielded.

How do you fix atomizer low on Istick?

Here is a checklist of things to do:

  1. Take the atomizer off of the mod.
  2. Tighten the coil all the way. It could be that the coil is loose.
  3. Check the 510 connection, and thoroughly clean the threading of the mod and atomizer with a q-tip.
  4. Make sure the 510 connection makes contact with the mod.

How do you fix a high atomizer?

How to Fix Check Atomizer /No Atomizer with a Vape Tank

  1. Try Another Tank/Mod. This is the best way to know if there’s truly a problem.
  2. Clean Your Contact Points.
  3. Check the 510 Pin on your Tank.
  4. Check the 510 Connector on your Mod.
  5. Reseat Your Coil.

Why does my Smok keep saying no atomizer?

If you press the firing button on your e-cig and you see the message ‘ no atomizer ‘ or ‘ check atomizer ‘ it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post